Top Photo Above - Those of you who shot with saboted .44 (.429-.430" dia.) bullets during the late 1980s and early 1990s probably realized quickly that the .50x.44 sabots and bullets of that diameter did not produce the best groups. Three-shot groups of that period with that sabot-bullet combination, on a good day, rarely stayed inside of 4 inches.
Center Photo Above - Shown at the left side of this line up is the Harvester Muzzleloading green .50x.44 Crush Rib Sabot and the 300-grain Hornady .430" diameter XTP jacketed hollow-point bullet. Note the different degrees of sabot opening exhibited by the recovered sabots. More powder and higher velocity continues to more completely open sabot sleeves.
Bottom Photo Above - At 2130 f.p.s., the 300-grain .44 XTP, paired up with
the green .50x.44 Crush Rib Sabot, produced excellent 100-yard accuracy with a Knight Rifles .50 caliber Long Range Hunter - like this sub 1-inch three-shot cluster.
For a look at the most common problems associated with loading and shooting saboted .44 caliber bullets out of a .50 caliber rifle, and how to overcome those problems - go to the NORTH AMERICAN MUZZLELOADER HUNTING report at the following link -
http://www.namlhunt.com/mlbullets4.html
Also...Discover the advantages of a slightly smaller diameter bullet...and what likely lies ahead for today's modern muzzleloading hunter. - Toby Bridges
